With Over 50+ years of crafting experience of underwater acoustic beacons the DKM502 is the acoustic locating beacons for maritime VDR & other application. DK485/K will assist in location of VDR & S-VDR capsules up to 6096 meters or 2000 ft. depth underwater at sea.
The DK485/K will provide a minimum of 30 days of uninterrupted operation once activated. These beacons have been tested to, and meet, or exceed, all requirements of SAE AS8045.The DK485 beacon is a battery-operated, 303 Stainless steel body, passivated finish underwater acoustic pulse generator that is activated when the water switch is immersed in either fresh or salt water at pressures greater than 7 to 10 PSI.
Physical Characteristics
Watertight aluminum case (1.25” dia, 3.86” length (less mount)).
Actuation in fresh or salt water 7-10 PSI
Capable of operation at depths of up to 20,000 feet (6096m)
Detectable at a range of 2000 to 4000 yards (1800 to 3600 meters) based on environmental factors.
Sustained pressure up to 8700 psi.
Dual water switch actuation initiates beacon operation upon immersion in either fresh or salt water.
The battery used to power the DK485/K will sustain beacon operation for a minimum of 30 days at an acoustic output of 160 dB operating frequency is 37.5 kHz.
Beacon Specifications
Operating Frequency
37.5 kHz ± 1 kHz
Operating Depth
Surface to 20,000 feet (6,096 meters)
Pulse Length
10 milliseconds ± 10%
Pulse Repetition Rate
1 second ± 10%
Useful Life
6 years
Operating Life
30 Days (Minimum).
Acoustic Output, Initial
1060 dynes/cm2rms pressure at 1 meter (160.5dB)
Acoustic Output, After 30 Days
700 dynes/cm2rms pressure at 1 meter (157.0 dB)
Operating Temperature
+28°F to +100°F (‐2.2°C to +37.8°C)
Actuation
Fresh or salt water
Radiation Pattern
Rated output over 80 percent of sphere
Size
1.25″ diameter x 3.86″ long (3.18 cm diameter 9.80 cm long)
Material
303 Stainless steel, passivated finish
Power Source
Lithium Battery, single cell. Factory or user replaceable.